Ultramid?PA66:

1000-11：Ultramid 1000-11 NF2001 is a general purpose PA6/6.

1000-2：Ultramid 1000-2 NF2001 is a general purpose PA6/6.

1003-11：Ultramid 1003-11 NF2002 is a general purpose, heat stabilized PA6/6.

1003-2：Ultramid 1003-2 NF2002 is a general purpose, heat stabilized PA6/6.

1310-11：Ultramid 1310-11 NF2001 is a coolled crystallization, fast cycling PA6/6 which provides extremely fast cycle times and improved productivity over Ultramid 1000.

1403-2：Ultramid 1403-2 NF3001 is a 13% glass reinforced, heat stabilized injection molding PA6/6.

1500-2：Ultramid 1500-2 NF2003 is a general purpose, 33% glass reinforced injection molding PA6/6.

1503-2：Ultramid 1503-2 NF2004 is a 33% glass reinforced, heat stabilized injection molding PA6/6.

1603-2, Ultramid 1603-2 NF2004 is a 43% glass reinforced, heat stabilized injection molding PA6/6 with the highest level of glass reinforcement for maximum strength and stiffness.

1703-2：Ultramid 1703-2 BK ND3007 is a 25% glass reinforced, heat stabilized, pigmented black injection molding PA6/6 for hydrolysis resistant applications.

7423-2：Ultramid 7423-2 NF3001 is an impact modified, 13% glass reinforced, heat stabilized injection molding PA6/6.

7523-2AM：Ultramid 7523-2AM is an impact modified, 33% glass reinforced, heat stabilized injection molding PA6/6.

N-265, Ultramid N-265 NF3001 is a general purpose, 40% mineral reinforced PA6/6 that provides excellent flatness and dimensional stability in,injection molding.

N-276, Ultramid N-276 NF3001 is a 40% mineral/glass reinforced, heat stabilized injection molding PA6/6.

N-333, Ultramid N-333 NF3001 is a 33% glass reinforced, heat stabilized, injection molding PA66 uncolored.

NBX-0025, Ultramid NBX-0025 NF2001 is a specialty, unreinforced PA6/6.

NFX-0102, Ultramid NFX-0102 NF2004 is a heat stabilized, 30% glass bead PA66 injection molding grade. It is especially formulated for low warp,increased stiffness and excellent dimensional stability.

TG3S, Ultramid TG3S is a 15% glass reinforced, heat stabilized, impact modified PA6 injection molding,compound developed for applications requiring improved toughness in combination with a balance of strength, stiffness, excellent moldability and surface aesthetics.

A25LD01, Ultramid? A25 LD 01 is a light stabilized polyamide 66 for the production of low dull fibers.

A27E01, Ultramid A27 E 01 is a low-viscosity, general-purpose PA66 grade for compounding. It conforms to FDA requirements including, 21 CFR 177.1500,EU Directive 2002/72/EC, the German BfR recommendation "X Polyamide", 1.6.1998 or legislations for other couies will be provided on request.

A27EZ01, Ultramid A27 EZ 01 is a low viscosity, general purpose PA66 grade for compounding and extrusion of monofilaments. It conforms to FDA requirements including, 21 CFR 177.1500,EU Directive 2002/72/EC, the German BfR recommendation "X Polyamide", 1.6.1998 or legislations for other couies will be provided on request.\

A3.

A3401, Ultramid A34 01 is an intermediate viscosity, PA66 grade. It conforms to FDA requirements including, 21 CFR 177.1500,EU Directive 2002/72/EC, the German BfR recommendation "X Polyamide", 1.6.1998 or legislations for other couies will be provided on request.

A3EG10, 50%Glass fibre reinforced injection moulding grade for industrial articles having very high rigidity as well as for electrical insulating parts.

A3EG3, Ultramid A3EG3 is a 15% glass fiber reinforced injection molding PA66 grade.

A3EG5, 25%Glass fibre reinforced injection moulding grade for machinery components and housings of high stiffness and dimensional stability such as coil formers and bearing cages. Also used for electrically insulating parts.

A3EG6, Ultramid A3EG6 is a 30% glass fiber reinforced injection molding PA66 grade for machinery components and housings of high stiffness and dimensional stability.

A3EG6FC, Glass fibre reinforced injection moulding grade for articles intended to come into contact with foodstuffs.

A3EG7, Ultramid A3EG7 is a 35% glass fiber reinforced injection molding PA66 grade for machinery components and housings of high stiffness and dimensional stability.

A3EG7FC, 35%Glass fibre reinforced injection moulding grade for articles intended to come into contact with foodstuffs.

A3HG2, Ultramid A 3HG2 is a 10% glass fiber reinforced injection molding PA66 grade.

A3HG5, Ultramid A3HG5 is a 25% glass fiber reinforced injection molding PA66 grade.

A3HG6HR, Ultramid A3HG6 HR BK23591 is a 30% glass reinforced, pigmented black, injection molding PA66 grade. It offers good resistance to hydrolysis.

A3HG7, Ultramid A3HG7 is a 35% glass fiber reinforced injection molding PA66 grade.

A3K, Ultramid A3K is an easy flowing, pigmented black, injection molding grade PA66.

A3KG24.

A3KN.

A3R. PE-modified dry running material for highly stressed, low noise and wear resistant, low-friction components such as bearings and sliding bars.

A3LHP, Ultramid A3L HP is an unreinforced, heat stabilized, impact modified, high flow, nylon 66 for injection molding. This grade has excellent flow and,improved ambient and low temperature toughness.

A3LHPUV,

A3SK, Very easy flowing injection moulding grade for rapid production of thin-walled technical parts (eg housings and small components)

A3W, Easy flowing, heat aging resistant injection moulding grade for fast processing. Uses include highly stressed parts such as bearings, bearing cages, gear-wheels, coil formers and cable connectors.

A3W2G10, Ultramid A3W2G10 BK20560 is a 50% glass fiber reinforced injection molding PA66 grade.

A3WG3, 15%Glass fibre reinforced and heat aging resistance injection moulding grade for machine components and housings of

medium stiffness. A3EG3 and A3HG3 are the preferred grades for producing electrically insulating parts.

A3WG5 Ultramid A3WG5 is a 25% glass fiber reinforced and heat resistance injection molding PA66 grade.

A3WG5MI.

A3WG6, Ultramid A3WG6 is a 30% glass fiber reinforced and heat resistance injection molding PA66 grade for machinery components and housings of high stiffness and dimensional stability.

A3WG7, Ultramid A3WG7 is a 35% glass fiber reinforced and heat resistance injection molding PA66 grade for machinery for industrial items.

A3WG10. 50%Glass fibre reinforced and heat aging resistance injection moulding grade for industrial articles having very high rigidity.

A3WG7HP, Ultramid A3WG7HP is a 35% glass reinforced, heat stabilized, injection molding PA66 grade with excellent flow and surface finish.

A3WGM53, Ultramid A3WGM53 is a 40% glass/mineral reinforced, pigmented black, injection molding grade for high stiffness parts with good dimensional stability and surface finish.

A3X2G10, 50%Glass fibre reinforced injection moulding grade with improved flame retardance and enhanced long-term stability. Flame retardant based on red phosphorus; very high stiffness and strength; outstanding electrical properties.

A3X2G5, Ultramid A3X2G5 is a 25% glass fiber reinforced injection molding PA66 grade with improved flame retardance and enhanced long-term performance. Flame retardant based on red phosphorus; outstanding mechanical and electrical properties.

A3X2G7, Ultramid A3X2G7 is a 35% glass fiber reinforced injection molding PA66 grade with improved flame retardance and enhanced long-term stability. Flame retardant based on red phosphorus; very high stiffness and strength; outstanding mechanical and electrical properties.

\A3X3G5, 25%Glass fibre reinforced injection moulding grade with improved flame retardance and enhanced long-term stability. Flame retardant based on red phosphorus; very high stiffness and strength; outstanding electrical properties.UL94-V0/3,2mm.

A3X4G7,

A3XZG5, Ultramid A3XZG5 is an impact-modified, 25% glass fiber reinforced injection molding PA66 grade with improved flame retardance.

A3Z, Impact-modified and stabilized injection moulding grade for components and housing with good low temperature impact resistance.

A3ZHP, Ultramid A3Z HP is an unreinforced, impact modified, heat stabilized, high flow PA66 injection molding grade. Ultramid A3ZHP offers a unique combination of maximum toughness and impact resistance with excellent high flow processability.

A3ZHPUV, Ultramid A3Z HP UV is an impact modified PA66 containing heat and ultraviolet light stabilizers.Designed for maximum toughness at low temperatures, Ultramid A3Z HP UV offers a unique combination of impact performance and excellent processability.

A3ZG6, Impact-modified, glass fiber reinforced injection moulding grade.

A3ZM4. Impact-modified, stabilized injection molding grade for components (housings) with high impact strength, heat distortion resistance and low warpage. Used for wheel covers.

A4H. High heat aging resistant, medium viscosity injection moulding grade for highly stressed parts such as bearing cages, gear-wheels, coil formers and cable connectors.

A4. Ultramid A4 is a medium viscosity, extrusion PA66 grade. It conforms to FDA requirements of 21 CFR 177.1500.

A5. Ultramid? A5. PHYSICAL. ISO Test Method. Property Value. Moisture, %. 62. RHEOLOGICAL. ISO Test Method. Property Value. MECHANICAL.

A5W.

A3WC4. Electrically conductive grade reinforced with 20% carbon fibers. Used for machinery elements and housings with high stiffness and dimensional stability, low density and favorable frictional behavior (e.g. connecting rods).

A38K.

C3M6.

C3M8. Mineral-reinforced and stabilized injection molding grade for machinery components such as crown gears and small parts with high impact strength and low warpage.

KR4205. Stabilized injection molding grade with improved flame retardance (free from halogens and phosphorus) and high toughness. Used for electrically insulating parts such as contact carriers and push-on terminal strips.

KR4281. 注塑改性級，含40%礦物質(zhì)增強(qiáng)改性的制品

KR4650. 特殊級，適合礦物質(zhì)增強(qiáng)改性的工程制品