進口氣動刀閘閥

德國巴赫進口氣動刀閘閥概述Bach of Germany imported pneumatic Knife Gate Valve Overview

進口氣動刀閘閥由氣動執行機構和刀型閘閥組成，通過配用電磁閥、接近開關等附件可以完成開、關兩位置的動作控制和信號輸出，也可以完成連續動作的自動控制。氣動刀閘閥分為上下兩部分，上半部分為氣動執行器，下半部分為刀閘閥，具有啟閉速度快、設計合理、結構緊湊、密封可靠。

Imported pneumatic knife gate valve by the pneumatic actuator and the knife type gate valve, by using electromagnetic valve, proximity switches and other accessories to complete the motion cool and signal output of the opening and closing of two position, also can complete automatic cool of continuous action. Pneumatic knife gate valve is divided into two parts, the upper part of the pneumatic actuator, the lower half of the knife gate valve with a hoist speed, reasonable design, compact structure, reliable sealing.

本類閥門在管道中一般應當水平安裝。刀閘閥操作輕便靈活、體積小、通道流暢、流阻小、重量輕、易安裝、易拆卸，公稱尺寸 DN50-DN800，可在工作壓力1.0MPa-1.6MPa。刀型閘閥其閘板具有剪切功能，可刮除密封面上的粘著物，自動清除雜物。不銹鋼閘板可防止腐蝕引起的密封泄漏。產品廣泛用于化工、煤碳、制糖、污水、造紙等領域，是一種理想的密封閥門。特別適合于造紙行業在管道上作調節和節流使用。

進口氣動刀閘閥的定義：The definition of the imported pneumatic knife gate valve

1、采用對夾一體式結構，體積小，重量輕。
2、采用可更換式密封結構，維修跟換更方便。
3、完全敞開的通道，可以防止介質在閥內的沉積。
4、閘板具有閘刀的功能，能有效的閘斷介質中各類雜物。 

The definition of the imported pneumatic knife gate valve:

1, the use of integrated structure, small size, light weight.

2, the use of replaceable seal structure, maintenance and change more convenient.

3, completely open channel, can prevent the medium in the valve deposition.

4, the gate with the knife, can effectively brake off all kinds of debris in the medium.

進口氣動刀閘閥技術參數：Imported pneumatic knife gate valve technical parameters: