產品描述
惠華產品：
1、 鎳層硬度hv小于80的全軟態鋁鎳復合帶。
ni- clad-al strips (ni :hv80-220) mild soft nickel-aluminium clading material with hardness of nickel plating layer less than 80hv.
2、 聚合物電池和軟包裝電池用鎳/鋁極耳。nickel/aluminium tags for li-polymer &soft-packing battery.
采用大日本印刷灰膠adopt epoxy hardener from dai nippon printing co., ltd
或者昭和電工的白膠
日本進口鋁帶表面處理技術。adopt japanese surface treatment technology for aluminum strips
3、 低內阻鎳帶/片�；萑A工程技術人員通過對鎳成分的改良，成功的 研制出電阻率為7.6的鎳帶。（一般鎳帶為8.6左右）惠華鎳帶比普通鎳帶低了15%左右。
nickel strips/plate with low elecity resistance. we make out nickel strips with elecity resistance rate 7.6 after adjusting content of the nickel by huihua’s technician, while that of normal one 8.6, thus it’s lower than ordianary one.
4、 鋰電池專用鋁帶。aluminium strip specially for li-ion battery.
（可以為客戶提供鈍化處理可直接貼膠制作軟包裝電池極耳）
5 鎳銅復合帶（鎳帶的升級產品）/鎳鐵復合帶（鍍鎳鋼帶的升級產品）。 o ther metal-cladding material such as ni-clad-cu strips/ni-clad-fe strips
1、 鎳層硬度hv小于80的全軟態鋁鎳復合帶。
ni- clad-al strips (ni :hv80-220) mild soft nickel-aluminium clading material with hardness of nickel plating layer less than 80hv.
2、 聚合物電池和軟包裝電池用鎳/鋁極耳。nickel/aluminium tags for li-polymer &soft-packing battery.
采用大日本印刷灰膠adopt epoxy hardener from dai nippon printing co., ltd
或者昭和電工的白膠
日本進口鋁帶表面處理技術。adopt japanese surface treatment technology for aluminum strips
3、 低內阻鎳帶/片�；萑A工程技術人員通過對鎳成分的改良，成功的 研制出電阻率為7.6的鎳帶。（一般鎳帶為8.6左右）惠華鎳帶比普通鎳帶低了15%左右。
nickel strips/plate with low elecity resistance. we make out nickel strips with elecity resistance rate 7.6 after adjusting content of the nickel by huihua’s technician, while that of normal one 8.6, thus it’s lower than ordianary one.
4、 鋰電池專用鋁帶。aluminium strip specially for li-ion battery.
（可以為客戶提供鈍化處理可直接貼膠制作軟包裝電池極耳）
5 鎳銅復合帶（鎳帶的升級產品）/鎳鐵復合帶（鍍鎳鋼帶的升級產品）。 o ther metal-cladding material such as ni-clad-cu strips/ni-clad-fe strips
我司常年提供鎳鋁復合帶
我司常年提供鋁鎳復合帶，銅鎳復合帶，鎳帶,鎳片,鎳材沖壓異型件。主要用于制造鎳鎘、鎳氫、鋰電池、組合電池及儀器儀表，電訊、電真空、特種燈泡等行業。本公司生產的鎳帶光亮、平整、無毛刺，在電池行業中享有盛譽。