JB-B04常溫化學拋光劑

u  產品特性

1.含適合的整平劑、緩蝕劑、光亮劑等，處理后表面光亮、平整、潔凈。有利于著色型材底色穩定、色澤鮮艷。

2.對砂面處理的型材有特別增光漂白效果。

3.工藝簡單、操作方便、槽液易于維護，鋁材損耗、槽液沉淀少，無氣味散發，符合環保要求。

u  開槽參數

JB－B04 : 30~50g / L

u  控制參數

總酸   ：30-40g/L

時間 ：1～8min                                        

u  維護和管理                          

   1.每天分析一次總酸度，依分析結果及時調整；每補加1kg JB－B04總酸度可升高0.8～1.0點；處理100m2消耗JB－B04：0.6～0.8Kg。

     2.每天清理槽液表面不溶污物，避免起料時污物附著產品表面造成清洗困難。

     3.長期使用后,當槽液中鋁離子積累過高時（30g/l）,應部分或全部更換槽液。

u  包裝、貯存及保質期

25kg塑料桶裝；避光、避堿、輕放、密封置干燥，陰涼處，防止泄漏。室溫存放1年。

JB-B04  Normal temperature chemical polishing Additive

u  Product Features

1.It contains leveling agent, corrosion inhibitor and brightener. Work piece will be bright, clean and smooth after treatment with this additive.

2.Effective specially for sand blasting surface, easy to use.

3.Simple maintenance of bath, less aluminum loss thus less precipitation, no odor and environmentally friendly.

u  Tank set up parameters

JB－B04 : 30~50g / L

u  Coolling parameters

Total Acid ：30-40g/L

time ：1～8min                                        

u  Maintenance and cool

  1.Analyse the total acidity once a day. Every 1kg of JB-B04 added will increase acidity by 0.8 to 1.0g/l. Consumption rate is 0.6 to 0.8kg of additive for every 100m2 of surface treated.

   2. Regular cleaning of unresolved substances floating on bath surface to prevent contaimination of work piece.

   3.When aluminum ions increased to >30g/l after long time production, part or all bath solution should be changed.

u  Packing and Storage

25kg plastic bucket；Protect form heating, avoid alkali, keep sealed in a dry, cool place and  prevent   leakage. The product shelve life is 1 year under room temperature