產品描述
JB-S02 常溫快速封閉劑
u 產品特性
1.槽液抗雜質離子性能優良。
2.對酸堿緩沖能力強，不需經常調pH值，氟、鎳消耗基本平衡；
3.對封閉“粉霜”，具有較強的抑制作用；適應厚膜鋁型材（20～30μm）常溫封閉；封閉速度可達1.2～1.8μm /min。
4.銀白色鋁型材，經封閉后仍保持銀白色。
u 開槽參數
JB-S02：4～6g/L
u 控制參數
Ni²+：0.8～1.5g/l Fˉ：0.4～0.8g/l
PH ：5.5～6.5 溫度 ：20～30℃
時 間 ： 1.2～1.8um/ min
u 維護和管理
1、正常情況下槽液工藝參數：Ni2+=0.8~1.2g/l 、F-=0.4~0.8g/l、PH =5.5~6.5。
2、根據化驗槽液的結果來確定添加量。一般情況下每生產一噸料約消耗JB-S02：1.0~1.5kg（以10um計）。
3、生產過程中控制pH值在5.5～6.5，過高用稀醋酸（或稀氫氟酸）調節其pH值、過低用稀氫氧化鈉（或稀氨水）溶液調節其pH值。
u 包裝、貯存及保質期
25kg紙箱裝；避光、避酸堿、輕放、密封置干燥，陰涼處，防止泄漏。室溫存放1年。
JB-S02 Cold & Fast Sealing Additive
u Product Features
1.Excellent resistance to impurity ions.
2. Strong buffer capability and able to adapt to wide range of technical parameters, no need frequent adjustment of PH value. Balance to consumption of fluoride and nickel.
3.Contains strong inhibitor to prevent formation of ash, adapt to thick film (20~30μm) at room temperature sealing ; the sealing speeds can be up to 1.2 ~ 1.8μm /min.
4.Maintain silver aluminum color after sealing.
u Tank set up parameters
JB-S02：4～6g/L
u Coolling parameters
Ni²+：0.8～1.5g/l Fˉ：0.4～0.8g/l
PH：5.5～6.5 Temperature ：20～30℃
Time ： 1.2～1.8um/ min
u Maintenance and coolling
1.Under normal condition, the tank liquid parameter should be Ni2+=0.8~1.2g/l 、F-=0.4~0.8g/l、PH =5.5~6.5.
2.The amount of solution to be added is depending on the testing result, under normal condition, each ton of aluminium profile consuming JB-S02: 1.0~1.5kg (for 10um)
3.Cool PH value between 5.5 and 6.5 during production. Add acetic acid if PH is too high and add ammonia water if it is too low.
u Packing and Storage
25kg carton pack；Protect form heating, avoid acid and alkali, keep sealed in a dry, cool place and prevent leakage. The product shelve life is 1 year under room temperature.
